| HP - Pumps |
1 1/2 hp |
| Voltage - Pumps |
208 to 230/480V AC |
| Phase - Pumps |
3 |
| Housing Material - Pumps |
Cast Iron |
| Max. Pressure - Pumps |
125 psi |
| Max. Head |
62 ft |
| Motor Enclosure - Pumps |
Totally Enclosed |
| Amps |
4.5-4.8/2.4 |
| Best Efficiency GPM @ PSI |
60 @ 23 |
| Port Rotation |
45 Degrees Increments |
| Bearing Type |
Ball |
| Motor Ambient Temp. Rating |
40 Degrees C |
| Installation Position |
Vertical |
| Thermal Protection |
No |
| Agency Compliance |
CSA |
| Max. Specific Gravity |
1 |
| Motor RPM |
3500 |
| Impeller Material |
Bronze |
| GPM of Water @ 40 Ft. of Head |
85 |
| Seal Material |
316 Stainless Steel, Buna Elastomer, Carbon, Ceramic |
| Wetted Materials |
Buna-N, Carbon, Cast Iron, Ceramic, Stainless Steel |
| Min. GPM @ Head |
12 gpm @ 62 ft |
| Motor Type |
Capacitor-Start |
| Inlet Pressure |
6 psi |
| Hz |
60 |
| Item - Straight Centrifugal Pumps |
Straight Centrifugal High Flow Pump |
| Max. GPM @ Head |
90 gpm @ 35 ft |
| Max. Case Pressure |
125 psi |
| Frame |
56 |
| Overload Protection |
Yes |
| GPM of Water @ 60 Ft. of Head |
30 |
| UPC |
697666934987 |
| Max. Liquid Temp. |
212 Degrees F |
| Impeller Type |
Closed |
| Best Efficiency GPM @ Head |
60 gpm @ 55 ft |
| Best Efficiency Range GPM @ Head |
55 to 85 gpm @ 78 to 62 ft |
| GPM of Water @ 50 Ft. of Head |
67 |
| Duty |
Continuous |
| Intake Type |
NPT |
| Seal Type |
Mechanical |
| Nameplate Voltage |
208-230/480V AC |
| Phase |
Three |
| Priming |
Manual |
| Flow Rate @ 50 ft of Head (Maximum) |
30 gpm |
| Motor Enclosure |
Totally Enclosed Fan Cooled (TEFC) |
| Specific Gravity (Maximum) |
1 |
| Frequency |
60 Hz |
| Maximum Media Temperature |
212 Degrees F |
| Flow Rate @ 60 ft of Head (Maximum) |
30 gpm |
| Horsepower |
1 1/2 hp |
| Maximum Flow Rate |
90 gpm |
| Motor Frame Designation |
56J |
| Wetted Material |
316 Stainless Steel, Bronze, Buna-N, Carbon, Ceramic |
| Maximum RPM |
3,500 RPM |
| Mounting Orientation |
Horizontal, Vertical |
| Impeller Design |
Closed |
| Standards |
CSA Certified |
| Flow Rate @ 80 ft of Head (Maximum) |
49 gpm |
| Flow Rate @ 20 ft of Head (Maximum) |
0 gpm |
| Flow Rate @ 30 ft of Head (Maximum) |
85 gpm |
| Shut Off Pressure (Maximum) |
125 psi |
| Pump Housing Material |
Cast Iron |
| Pumping Application |
Booster Service, Jockey Pump Service, Liquid Transfer, Spraying Systems, Water Circulation |
| Flow Rate @ 90 ft of Head (Maximum) |
40 gpm |
| Discharge Rotation |
45 Degrees Increments |
| Best Efficiency Flow |
60 gpm |
| For Use With Potable Systems |
Yes |
| Duty Cycle |
Continuous |
| Flow Rate @ 40 ft of Head (Maximum) |
67 gpm |
| Best Efficiency Head |
55 ft |
| Minimum Flow Rate |
30 gpm |
| Flow Rate @ 70 ft of Head (Maximum) |
58 gpm |
| Flow Rate @ 100 ft of Head (Maximum) |
27 gpm |
| Electrical Connection Type |
Hardwired |
| Discharge Type |
NPT |
| Maximum Feet of Head |
118 ft |
| Compatible with Media Type |
Water |
| Thermal Overload Protection |
No |
| Series |
3642 |
| Shaft Material |
Stainless Steel |
